There are so many different types of Cone Christmas Trees you can make this Holiday season; however a lot of the Cone DSC 5440 001 150x150 DIY Rosette Cone Christmas TreeChristmas Tree Projects are a bit time consuming and although they are well worth the extra time it’s often difficult to actually find the time to sit down and make them. SO…. I’m going to show you a very quick and easy DIY Rosette Cone Christmas Tree tutorial that only takes about 10-15 minutes to make.  You can’t beat that, right?!!

Here is what you will need:

  • Foam Cone
  • Push Pins
  • Rosette Ribbon (I purchased mine from the fabric section at Hobby Lobby)

Step 1: Use a Push Pin to adhere the Rosette Ribbon to the bottom of the Cone; Once you push the pin all the way in the ribbon will cover up the push pin

DSC 5027 1024x680 DIY Rosette Cone Christmas Tree

Step 2: Wrap the Rosette Ribbon around the cone in a spiral direction

DSC 5029 1024x682 DIY Rosette Cone Christmas Tree

Step 3: Insert a Push Pin about every 2 or 3 rows to make sure the ribbon stays in place

DSC 5030 1024x682 DIY Rosette Cone Christmas Tree

Step 4: When you have wrapped the rosette ribbon all the way to the top of the cone insert another push pin. Then you should turn the ribbon so that you can pin a rosette on the very top of the cone. To add a little height I twisted my ribbon so I could put another rosette on top of the first one and used another push pin to hold it in place

DSC 5032 1024x680 DIY Rosette Cone Christmas Tree

 

DSC 5034 990x1024 DIY Rosette Cone Christmas Tree

And there you have it, a quick and easy DIY Rosette Cone Christmas Tree

DSC 5425 001 DIY Rosette Cone Christmas Tree

SIGNATURE2 DIY Rosette Cone Christmas Tree

Subscribe Below to Get Email Updates!

Tags: , , , ,

pixel DIY Rosette Cone Christmas Tree